50 Hz
50 Hz
WALL-MOUNTED AXIAL DIRECT DRIVE FAN WITH CAST ALUMINUM IMPELLER
MANUFACTURING FEATURES:
• Plate axial fan with circular reinforced frame.
• Modular motor-impeller assembly.
• Cast aluminum impeller with variable pitch angle.
• Polyester powder finishing coat.
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase, motors up to 4kW and 400/690V 50Hz for higher powers.
APPLICATIONS:
Designed for wall or duct installation, they are suitable for:
• Air renewal in buildings and industries.
• Maximum working temperature: 1ph 50ºC, 3ph 60ºC.
UNDER REQUEST:
• Supply impeller (air direction from impeller to motor)
• 100% reversible impeller.
• 60Hz fans and special voltages.
• Hot-dipped galvanized or stainless steel housing.
| Fan sheet |
|||
|---|---|---|---|
| Fan type |
Axial fan |
||
| Installation category |
A | Fan in free inlet and free outlet conditions, and with a partition between the inlet and outlet areas |
|
| Efficiency category |
Static | ||
| VF | No | ||
| Values | Requirements 2026 | ||
| Max. efficiency (%) |
46.35 | 41.28 | |
| Efficiency grade (N) |
55.07 | 50 | |
| Absorbed power (kW) | 1.478 | ||
| Flow (m³/h) |
5289.55 | ||
| Static pressure (Pa) |
454.21 | ||
| Speed (rpm) |
|||
| Specific ratio |
1.00 | ||
Phone: +46 431 850 00
Fax: +46 431 850 10