fan image
Model
SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

ATEX SHORT CASED AXIAL FAN WITH CAST ALUMINUM IMPELLER DIRECT DRIVE


MANUFACTURING FEATURES:
• Axial fan short casing with circular reinforced frame.
• Motor-impeller assembly through modular system.
• Cast aluminium impeller.
• Corrosion-resistant powder coat polyester resin.
•  ATEX asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
• ATEX certified:            Motor Ex-d: II 3G EX-d IIC T4
                                      Motor Ex-e: II 3G Ex-e IIC T4
                                      Motor Ex-nA: II 3G/D Ex-nA IIC T3

APPLICATIONS
Designed for wall or duct installation, they are suitable for:
• Air renewal in buildings and industries.
• Smoke extraction (max 45-50ºC).
• Ventilation in indoor environments classified as ATEX
• Maximum working temperature: 50ºC

UNDER REQUEST
• B form or 100% reversible impeller.
• 60Hz fans and special voltages.

Fan

Max flow
151010 m³/h
SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

Dimensions scheme
C' (Mot.T.132) C' (Mot.T.160L) C' (Mot.T.160M) C' (Mot.T.180L) C' (Mot.T.180L) C' (Mot.T.180M) C' (Mot.T.200) C' (Mot.T.200) C' (Mot.T.225) C' (Mot.T.225) E O ØA ØB ØD ØJ
765 772 765 804 804 766 869 869 954 954 500 20x18º 1365 1320 1263 15

SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

Electrical scheme

SCAX 125 T4 (A7:8)

Model
RP 125
Information
PROTECTION GUARD FOR LONG CASE AXIAL FANS

MANUFACTURING FRATURES

• Protection guard for motor or impeller side to avoid objects introduction. For SCAP and SCA model, RP can be applied only to impeller side.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
AC 1250
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
MFLCA 125
Information
CASE FANS MOUNTING SUPPORT

MANUFACTURING FEATURES

• Made of steel and protected against corrosion with polyester resin powder.

Model
BAD 21
Information
CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

SCAX 125 T4 (A7:8) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)