CRFP 710 T6 2,2KW F400

CENTRIFUGAL DIRECT DRIVE SMOKE ROOF FAN WITH BACKWARD CURVED IMPELLER AND ABS COWL - 400ºC/2h

MANUFACTURING FEATURES
• Roof cowl made of ABS
• Structure, roof base support and bird protection guard made of galvanised steel.
• High efficiency backward impeller with self-cleaning system of steel.
• Standard asynchronous motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors, 230/400V 50Hz in three phase motors and 400V 50Hz in 2 speed motors.

APPLICATIONS
Specially designed for roof installation, they are suitable for:
• Smoke extraction.
• Smoke emergency exhaust with motor outside the hazardous area.
• Air renewal in buildings and industries.
• Industrial and professional kitchen hoods.
• Maximum continuous operation temperature: 80ºC (fluide).
• Maximum ambient temperature: 50ºC

UNDER REQUEST
• 60Hz and special voltages.
• Sparking proof fan with EEx_d certified motor.

Official homologation by the European laboratory APPLUS according to EN 12101-3:2015
Certification Nr: 0370-CPR-2729

Fan

Max flow

18940 m³/h

Weight

170 Kg

Motor

Power

2,2 kW

RPM Motor

965

I max. 230 V

10,3

I max. 400 V

5,94

Size

112M

Weight

38 Kg

Efficiency

84.3 %

0.64

CRFP 710 T6 2,2KW F400

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

CRFP 710 T6 2,2KW F400

A	B aprox	C	D	E	F	G	H	K aprox
1168,5	1118,5	1035	840	9	429,6	439,5	50	629

CRFP 710 T6 2,2KW F400

Model

INT 25 3P A

Information

SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model

INT 400 25A 3P

Information

SAFETY SWITCH FOR 400ºC/2h

Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.

Model

KF 710-800

Information

FIXING KIT FOR CRFP

MANUFACTURING FEATURES

• Fixing kit for CRFP roof fan made of galvanized steel.

Model

KB 710-800

Information

CRFP TILTING KIT

MANUFACTURING FEATURES

• Tilting kit made of galvanised steel.
• It allows fan inclination to make cleaning of duct and impeller easier.

Model

KV CTH-3 710-800

Information

CRFP VERTICAL DISCHARGE

MANUFACTURING FEATURES

• Accessory to convert the CRFP roof fan to vertical discharge.
• Manufactured in aluminuim

Model

SFC 400 III 8A *

Information

FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current