Product out of catalogue
fan image
Model
MPFIM 45/18 T4 11kW

MPFIM 45/18 T4 11kW

MEDIUM PRESSURE FAN WITH FORWARD CURVED IMPELLER DIRECT DRIVE IN IN ROLLING STEEL SHEET WELDED HOUSING

MANUFACTURING FEATURES:

• Rolling steel sheet housing.
• Completely joined or welded housing.
• Galvanised steel sheet simple inlet forward curved impeller.
• Polyester powder finishing coat.
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW and 400/690V y 400/690V 50Hz and special voltages.
• 2 speed motors.
• Fan for air working temperatures up to 250ºC.
• Position: LG 0, LG 45, LG 90, LG 135, LG 180, LG 225, LG 315, RD 0, RD 45, RD 90, RD 135, RD 180, RD 225, RD 270, RD 315

Fan

Max flow
12500 m³/h
Weight
190 Kg

Motor

Power
11 kW
RPM Motor
1455
I max. 400 V
21,2
I max. 690 V
12,3
Size
160L
Weight
100 Kg
Efficiency
91.4 %
FP
0.83
MPFIM 45/18 T4 11kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MPFIM 45/18 T4 11kW

Dimensions scheme
A B C D E F G H I J K L M N O P Q R S X Y Z Z1
891 737 329 314,5 553 280 360 791 400 450 485 602 632 404 328 356 515 207 436 11 365 11 430 802,75 200 13

MPFIM 45/18 T4 11kW

Electrical scheme

MPFIM 45/18 T4 11kW

Model
INT 25 3P A
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
RA 45/18
Information
INLET PROTECTION GUARD FOR CENTRIFUGAL FANS

MANUFACTURING FRATURES

• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.

Model
EI 45/18
Information
CIRCULAR OUTLET CONNECTION FLANGE

MANUFACTURING FEATURES

• Connection to be fitted in the centrifugal fans outlet.
• Manufactured in galvanized steel.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
AC 450
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
BA-400 45
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
RBS 45/18
Information
OUTLET PROTECTION GUARD

MANUFACTURING FRATURES

• Outlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of steel and protected against corrosion with polyester resin powder.

Model
SFC 400 III 23A *
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

MPFIM 45/18 T4 11kW

Spare parts scheme
Family Name Qty
1 TURBINE GALV.450X183X42 LG x1
2 MOTOR 11KW T4 B3 400/690V x1
4 CASING MB 45 x1
5 INLET CONE MB-MBC-MT45/18 x1