MEDIUM PRESSURE FAN WITH BACKWARD CURVED IMPELLER BELT DRIVE IN Fe360 SHEET
MANUFACTURING FEATURES:
• Fan made of Fe360 sheet.The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºC with peaks of 200ºC.
• Fully welded housing.
• Single inlet backward impeller with self-cleaning system, manufactured of rolled steel sheet and polyester powder finishing.Impellers are painted with polyester primer that resists temperatures up yo 300ºC.
• Motorized fan with basement (configuration 12). Full equipped fans including: motor, pulleys, belts, belts guard and shaft guard. Fitted over a base plate.
• Standard orientation LG270.
• It allows adjusting the orientation locally from models 220 to 630. Models sizes from 710 to 2000 size the orientation is fixed.
APPLICATIONS:
Designed for inline installation, they are suitable for:
• Industrial applications, extraction or injection of air.
• Cooling of machines and parts.
• Clean air and pneumatic transport.
• Exhaust after filters, separators and cyclones.
• Dusty air or with low load of granulated materials.
• Maximum working temperature: carried air: 200ºC, ambient: 60ºC.
UNDER REQUEST
· Fans for 60Hz and special voltages.
· 2 speed motor.
· Fan with free shaft (configuration 1) or with motor supported on the pedestal side (configuration 9).
· C4 or C5 coating painting
· Hot dip galvanized
· Special steel (Cor-Ten A, Hardox...)
· Inox 304 (normal or electropolished finish)
· Inox 316 (normal or electropolished finish)
· Cooling wheel
· Anticaloric paint
· Reinforced housing
· Fully welded housing (waterproof)
· Insulated housing
· Split casing (for big sizes)
· Inspection door to facilitate maintenance and cleaning
· Drain plug.
· Airtight axle
· Frontal foot
· Double suction flange
· Available in the following versions:
- Non-sparking air passage and standard motor.
- ATEX II3GD Ex_d
- ATEX II3G Ex_e
- ATEX II3GD Ex_na
· Other brands of motors.
· Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.
A | a | a1 | a2 | B | b | b1 | b2 | C | D | d | d1 | D1 | d2 | D2 | D3 | D4 | D5 | D6 | D7 | E | F | G | H | H1 | H2 | I | J | K | L | M | N | N1xØ1 | n1xp | N2xØ2 | n2xp | N3 | N4 | O | O6 | Ø3 | Ø4 | P | Q | R | R' | S | S1 | S2 | S3 | S4 | S5 | S6 | S7 | T | U | U' | V | V1 | W | X | X | X1 | X2 | X3 | X4 | X5 | X6 | X7 | Y |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
490 | 1276 | 1347 | 1407 | 2358 | 898 | 978 | 1038 | 2620 | 1120 | 1130 | 1200 | 1824 | 1250 | 1572 | 1500 | 1434 | 1276 | 1085 | 2081 | 3176 | 1120 | 579 | 1500 | 1120 | 1500 | 1640 | 917 | 1073 | 1047 | 120 | 75 | Nº24 M10x30 | 4x200 | 24x18 | 6x200 | 120 | 65 | 917 | 961 | 28 | 30 | 1073 | 210 | 65 | 75 | 1500 | 1276 | 1085 | 1120 | 2081 | 1824 | 1572 | 1434 | 25 | 1640 | 1640 | 1205 | 90 | 2965 | 120 | 1276 | 1120 | 2081 | 1824 | 1572 | 1500 | 1434 | 1085 | 220 |
MANUFACTURING FEATURES
• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.
Nº | Family | Name | Qty |
---|---|---|---|
2 | TURBINE | MTRM 1600 LG | x1 |
3 | INLET CONE | MBRM-MTRM 1600 | x1 |
6 | PIECE TRANSMISSION | 522 | x1 |