Product out of catalogue
fan image
Model
MPFIC 40/16 T4 7,5kW

MPFIC 40/16 T4 7,5kW

MEDIUM PRESSURE FAN WITH FORWARD CURVED IMPELLER DIRECT DRIVE IN REINFORCED ROLLING STEEL SHEET WELDED HOUSING

MANUFACTURING FEATURES:

• Reinforced rolling steel sheet housing completely welded (internally and externally) with polyester powder finishing coat.
• Standart asynchronous squirel-cage motor with IP-55 protection and rated class F insulation. Standard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.
• Standard orientation: LG270.

APPLICATIONS:

Designed for inline installation, they are suitable for:
• Hot air exhaust in ovens or facilities with hight temperatures.
• Clean air transport.
• Maximum working temperature: carried air: 250ºC, ambient 1ph 50ºC, 3ph 60ºC.

UNDER REQUEST

• 2 speed motors.
• Orientation: LG0, LG90, LG180.

Fan

Max flow
11510 m³/h
Weight
89 Kg

Motor

Power
7,5 kW
RPM Motor
1455
I max. 400 V
14,1
I max. 690 V
8,17
Size
132M
Weight
68 Kg
Efficiency
90.4 %
FP
0.86
MPFIC 40/16 T4 7,5kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MPFIC 40/16 T4 7,5kW

Dimensions scheme
A B C D E F G H I J K L M N O P Q R S T U V X
790 670 292 254 334 618 498 400 270 86 406 322 300 370 254 334 11 438 464 11 325 10x20 473

MPFIC 40/16 T4 7,5kW

Electrical scheme

MPFIC 40/16 T4 7,5kW

Model
INT 25 3P A
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
RA 40/16
Information
INLET PROTECTION GUARD FOR CENTRIFUGAL FANS

MANUFACTURING FRATURES

• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.

Model
EI 40/16
Information
CIRCULAR OUTLET CONNECTION FLANGE

MANUFACTURING FEATURES

• Connection to be fitted in the centrifugal fans outlet.
• Manufactured in galvanized steel.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
AC 400
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
BA-400 40
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
RBS 40/16
Information
OUTLET PROTECTION GUARD

MANUFACTURING FRATURES

• Outlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of steel and protected against corrosion with polyester resin powder.

Model
SFC 400 III 16A *
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

MPFIC 40/16 T4 7,5kW

Spare parts scheme
Family Name Qty
1 TURBINE GALV.400X160X38 LG x1
2 INLET CONE MB-MT40/16 x1
3 MOTOR 7,5kW T4 B5 400/690V x1