Product out of catalogue
DDE 10/10 M6 0,32kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point
fan image
Model
DDE 10/10 M6 0,32kW

DDE 10/10 M6 0,32kW

LOW PRESSURE CENTRIFUGAL FAN WITH DOUBLE INLET FORWARD CURVED IMPELLER DIRECT DRIVE WITH EXTERNAL ROTOR MOTOR

MANUFACTURING FEATURES

• Fully made of galvanised steel sheet (EN 10142) with overlapping binding by high-tech folding.
• Double inlet forward curved impeller made of galvanized steel sheet.
• Supplied with mounting feed included in price.
• External rotor motor and impeller assembled as a set, supported by fixing arms.
Closed motor with IP-55 protection index. Manufactured with standard voltages: 230V 50Hz in single phase motors (with voltage adjustable speed and integrated thermal protectors) and 230/400V in three phase motors (adjustable motor by transformer). Ball bearings greased for life and integrated vibration isolation. Dynamically balanced according to DIN ISO 1940. With mounted terminal box. Performance data according to AMCA 210-99 (fig. 12), UNI 10531 (section 29.2 Figure 30c and f) and ISO 5801 (fig. 69 c and f section 30.2).

APPLICATIONS
Designed for assembly in equipment:
• Ventilation boxes and air handling units.
• Centrifugal heaters.
• Industrial and professional kitchen hoods.
• Maximum working temperature: 50ºC.

Fan

Flow
3710 m3/h

Motor

Power
0,315 kW
RPM Motor
883
Capacitor
16µF 450V
I max. 230 V
2,9

DDE 10/10 M6 0,32kW

Dimensions scheme
1900-01-10 00:00:00

DDE 10/10 M6 0,32kW

Electrical scheme

DDE 10/10 M6 0,32kW

Model
REG 3A
Information
MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model
REG 5A
Information
MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model
INT 25 3P A
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped with an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)