fan image
Model
LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

ATEX LONG CASED AXIAL SMOKE FAN WITH CAST ALUMINUM IMPELLER DIRECT DRIVE

MANUFACTURING FEATURES:

• Reinforced fan casing manufactured in rolling steel sheet.
• Modular motor-impeller assembly.
• Cast aluminum impeller with variable pitch angle.
• Polyester powder finishing coat.
• Housing with motor access door.
• ATEX asynchronous squirrel-cage motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.
• ATEX certified:            Motor Ex-d: II 3G EX-d IIC T4
                                      Motor Ex-e: II 3G Ex-e IIC T4
                                      Motor Ex-nA: II 3G/D Ex-nA IIC T3

APPLICATIONS

Designed for wall or duct installation, they are suitable for:
• Air renewal in buildings and industries.
• Smoke extraction (max 45-50ºC).
• Maximum working temperature: 50ºC
• Ventilation in indoor environments classified as ATEX

UNDER REQUEST

• B-form or 100% reversible impeller.
• 60Hz fans and special voltages.
• Bigger fan sizes.

Fan

Max flow
27520 m³/h
LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

Dimensions scheme
E O ØA ØB ØD ØJ
600 16x22,5º 802 770 715 12

LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)

Electrical scheme

LCAX 71 T4 (A5:6)

Model
RP 71
Information
PROTECTION GUARD FOR LONG CASE AXIAL FANS

MANUFACTURING FRATURES

• Protection guard for motor or impeller side to avoid objects introduction. For SCAP and SCA model, RP can be applied only to impeller side.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
MFLCA 71
Information
CASE FANS MOUNTING SUPPORT

MANUFACTURING FEATURES

• Made of steel and protected against corrosion with polyester resin powder.

Model
AC 710
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
BA-400 71
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
PSLCAP 71
Information
TILT MOUNTING SUPPORT FOR LCAP FANS

MANUFACTURING FEATURES

• Made of steel and protected against corrosion with polyester resin powder.

Model
BAD 16
Information
CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

Model
KIT ARFM 71
Information
AXIAL ROOF FAN KIT - METALLIC

Set to install long cased axial fans on the roof :  LCAP,  LCA ...

It is composed by a roof cowl made of galvanized steel, a roof base support and bird protection guard with powder finishing coat.

Model
KIT ARF 71
Information
AXIAL ROOF FAN KIT

Set to install long cased axial fans on the roof :  LCAP,  LCA ...

It is composed by a roof cowl made of reinforced fiberglass, a roof base support and bird protection guard with powder finishing coat.

The kit musn't be installed if the air speed is higher than 13 m/s.

LCAX 71 T4 (A5:6) Zone 2: FAN (Ex h IIB+H2 T3 Gc) + MOTOR (Ex ec IIC T3 Gc)