Product out of catalogue
fan image
Model
MPRIC 31/10 T2 1,1kW

MPRIC 31/10 T2 1,1kW

MEDIUM PRESSURE FAN WITH BACKWARD CURVED IMPELLER DIRECT DRIVE IN REINFORCED STEEL CASING

MANUFACTURING FEATURES:

• Reinforced rolling steel sheet housings completely welded (internally and externally) with polyester powder finishing coat.
• Reinforced high efficiency backward impeller with self-cleaning system.
• Standart asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Standard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase motors up to 4kW and 400/690V 50Hz for higher powers.
• Standard orientation: LG270.

APPLICATIONS:

Designed for inline installation, they are suitable for:
• Industrial applications, extraction or injection of air.
• Hot air exhaust in ovens or facilities with high temperatures.
• Clean and slightly dusty air transport.
• Maximum working temperature: carried air: 250ºC, ambient: 1ph 50ºC, 3ph 60ºC.

UNDER REQUEST:

• 2 speed motors.
• Orientation: LG0, LG90,LG180.

Fan

Max flow
4810 m³/h
Weight
42 Kg

Motor

Power
1,1 kW
RPM Motor
2800
I max. 230 V
4,05
I max. 400 V
2,33
Size
80
Weight
16 Kg
Efficiency
82.7 %
FP
0.85
MPRIC 31/10 T2 1,1kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MPRIC 31/10 T2 1,1kW

Dimensions scheme
A B C D E F G H I J K L M N O P Q R S S U V X
630 550 246 204 274 458 378 300 181 86 393 321 240 360 204 274 11 355 382 11 257 10x20 377

MPRIC 31/10 T2 1,1kW

Electrical scheme

MPRIC 31/10 T2 1,1kW

Model
INT 25 3P A
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
RA 31/12
Information
INLET PROTECTION GUARD FOR CENTRIFUGAL FANS

MANUFACTURING FRATURES

• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.

Model
BA-400 30/31
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
RBS 31/12
Information
OUTLET PROTECTION GUARD

MANUFACTURING FRATURES

• Outlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of steel and protected against corrosion with polyester resin powder.

Model
AC 300
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
SFC 230 I 4,2A *
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 3,6A *
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

MPRIC 31/10 T2 1,1kW

Spare parts scheme
Family Name Qty
1 TURBINE THRE 315X146X19 R (EQUIL) x1
1 TURBINE REFRIG.BCTV/H450-500-560( x1
2 INLET CONE MBR-MBRC31/10 x1
3 MOTOR 1,1KW T2 B5 230/400V x1
4 MOTOR SUPPORT MBRC31(T.80) x1