fan image
Model
SCA 45 M4 (A5:6)

SCA 45 M4 (A5:6)

SHORT CASED AXIAL DIRECT DRIVE FAN WITH CAST ALUMINUM IMPELLER

MANUFACTURING FEATURES:
• Plate axial fan with circular reinforced frame.
• Modular motor-impeller assembly.
• Cast aluminum impeller with variable pitch angle.
• Polyester powder finishing coat.
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONS:
Designed for wall or duct installation, they are suitable for:
• Air renewal in buildings and industries.
• Smoke exhaust (maximum 50-60ºC).
• Maximum working temperature: 50ºC single phase, 60ºC three phase.

UNDER REQUEST:
• Supply impeller (air direction from impeller to motor), 100% reversible impeller.
• 60Hz fans and special voltages.
• Hot-dipped galvanized or stainless steel housing.
• Optional can be adapted an square plate to the frame, to transform it in an axial square frame version fan.

Fan

Max flow
6760 m³/h
SCA 45 M4 (A5:6)
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

SCA 45 M4 (A5:6)

Dimensions scheme
C' (Mot.T.100L) C' (Mot.T.100L) C' (Mot.T.100L) C' (Mot.T.100L) C' (Mot.T.63) C' (Mot.T.63) C' (Mot.T.71) C' (Mot.T.71) C' (Mot.T.80) C' (Mot.T.80) C' (Mot.T.90L) C' (Mot.T.90L) C' (Mot.T.90L) C' (Mot.T.90L) C' (Mot.T.90S) C' (Mot.T.90S) E E O O ØA ØA ØB ØB ØD ØD ØJ ØJ
428 428 428 428 338 338 348 348 357 357 397 397 397 397 372 372 250 250 8X45º 8X45º 525 525 500 500 452 452 12 12

SCA 45 M4 (A5:6)

Electrical scheme

SCA 45 M4 (A5:6)

Model
RP 45
Information
PROTECTION GUARD FOR LONG CASE AXIAL FANS

MANUFACTURING FRATURES

• Protection guard for motor or impeller side to avoid objects introduction. For SCAP and SCA model, RP can be applied only to impeller side.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
MFLCA 45
Information
CASE FANS MOUNTING SUPPORT

MANUFACTURING FEATURES

• Made of steel and protected against corrosion with polyester resin powder.

Model
AC 450
Information
CONNECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
BA-400 45
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
BAD 12
Information
CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

Model
KIT ARFM 45
Information
AXIAL ROOF FAN KIT - METALLIC

Set to install long cased axial fans on the roof :  LCAP,  LCA ...

It is composed by a roof cowl made of galvanized steel, a roof base support and bird protection guard with powder finishing coat.

Model
KIT ARF 45
Information
AXIAL ROOF FAN KIT

Set to install long cased axial fans on the roof :  LCAP,  LCA ...

It is composed by a roof cowl made of reinforced fiberglass, a roof base support and bird protection guard with powder finishing coat.

The kit musn't be installed if the air speed is higher than 13 m/s.