50 Hz
50 Hz
HIGH PRESSURE FAN WITH HIGH EFFICIENCY BACKWARD CURVED IMPELLER BELT DRIVE IN Fe360 SHEET
MANUFACTURING FEATURES:
• Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºC with peaks of 200ºC.
• Fully welded housing.
• High efficiency simple inlet backward impeller with self-cleaning system made of Fe360 sheet statically and dynamically balanced. Impellers are painted with polyester primer that resists temperatures up to 300ºC.
• Motorized fan with basement (configuration 12). Full equipped fans including: motor, pulleys, belts, belts guard and shaft guard. Fitted over a base plate.
• Standard orientation LG270.
• It allows adjusting the orientation locally from models 350 to 630. Models sizes from 710 to 2000 size the orientation is fixed.
APPLICATIONS:
Designed for inline installation, they are suitable for:
• Industrial applications, extraction or injection of air.
• Cooling of machines and parts.
• Clean and slightly dusty air transport.
• Exhaust after filters, separators and cyclones.
• Pneumatic transport.
• Maximum working temperature: carried air: 200ºC, ambient: 60ºC.
UNDER REQUEST
· Fans for 60Hz and special voltages.
· 2 speed motor.
· Fan with free shaft (configuration 1) or with motor supported on the pedestal side (configuration 9).
· C4 or C5 coating painting
· Hot dip galvanized
· Special steel (Cor-Ten A, Hardox...)
· Inox 304 (normal or electropolished finish)
· Inox 316 (normal or electropolished finish)
· Cooling wheel
· Anticaloric paint
· Reinforced housing
· Fully welded housing (waterproof)
· Insulated housing
· Split casing (for big sizes)
· Inspection door to facilitate maintenance and cleaning
· Drain plug.
· Airtight axle
· Frontal foot
· Double suction flange
· Available in the following versions:
- Non-sparking air passage and standard motor.
- ATEX II3GD Ex_na
- ATEX II3G Ex_e
- ATEX II3GD Ex_d
· Other brands of motors.
· Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.
| a | A | a1 | a2 | b | B | b1 | b2 | C | d | D | d1 | D1 | d2 | D2 | D3 | D4 | D5 | D6 | D7 | E | F | G | H | H1 | H2 | I | J | K | L | M | N | N1xØ1 | n1xp | N2xØ2 | n2xp | N3 | N4 | O | O6 | Ø3 | Ø4 | P | Q | R | R' | S | S1 | S2 | S3 | S4 | S5 | S6 | S7 | T | T1 | U | U' | V | V1 | X | X1 | X2 | X3 | X4 | X5 | X6 | X7 | Y |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 569 | 232 | 629 | 669 | 404 | 1655 | 464 | 504 | 2028 | 715 | 936 | 775 | 1188 | 815 | 1114 | 1092 | 1063 | 963 | 893 | 1500 | 2163 | 853 | 349,5 | 1070 | 936 | 1070 | 1450 | 780 | 569 | 1010 | 55 | 65 | Nº16 M10x30 | 2x160 | 14x12 | 3x160 | 120 | 55 | 780 | 564 | 28 | 30 | 569 | 170 | 55 | 65 | 1092 | 963 | 983 | 936 | 1500 | 1188 | 1114 | 1063 | 55 | 22 | 1450 | 1450 | 1240 | 80 | 963 | 936 | 1500 | 1188 | 1114 | 1092 | 1063 | 893 | 220 |
MANUFACTURING FEATURES
• For axial (inlet and outlet) and centrifugal (inlet) fans.
UNDER REQUEST
• Versions in stainless 304 and stainless 316.
MANUFACTURING FEATURES
• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.
MANUFACTURING FRATURES
• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.
Phone: +46 431 850 00
Fax: +46 431 850 10
Operation & maintenance Manual